Mikrotik
Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP 10Gbps cage,
Dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case
RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP 10Gbps interface and IPsec hardware acceleration for a great price!
The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.
RB4011iGS 5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.
We have two versions available.
RB4011iGS 5HacQ2HnD-IN-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
RB4011iGS 5HacQ2HnD-IN (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Specifications :
Details | |
---|---|
Product code | RB4011iGS 5HacQ2HnD-IN |
Architecture | ARM 32bit |
CPU | AL21400 |
CPU core count | 4 |
CPU nominal frequency | auto (533 - 1900) MHz |
Switch chip model | RTL8367SB |
Dimensions | 228 x 120 x 30 mm |
RouterOS license | 5 |
Operating System | RouterOS v7 |
Size of RAM | 1 GB |
Storage size | 512 MB |
Storage type | NAND |
MTBF | Approximately 200'000 hours at 25C |
Tested ambient temperature | -40°C to 45°C |
IPsec hardware acceleration | Yes |
Suggested price | $275.00 |
Wireless capabilities
Details | |
---|---|
Wireless 5 GHz Max data rate | 1733 Mbit/s |
Wireless 5 GHz number of chains | 4 |
Wireless 5 GHz standards | 802.11a/n/ac |
Antenna gain dBi for 5 GHz | 3 |
Wireless 5 GHz chip model | QCA9984 |
Wireless 5 GHz generation | Wi-Fi 5 |
Wireless 2.4 GHz Max data rate | 300 Mbit/s |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 3 |
Wireless 2.4 GHz chip model | R11e-2HnD |
Wireless 2.4 GHz generation | Wi-Fi 4 |
WiFi speed | AC2000 |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 10 |
Fiber
Details | |
---|---|
SFP ports | 1 |
Peripherals
Details | |
---|---|
MiniPCI-e slots | 1 |
Serial console port | RJ45 |
Powering
Details | |
---|---|
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 12-57 V |
Max power consumption | 44 W |
Max power consumption without attachments | 23 W |
Cooling type | Passive |
PoE in | Passive PoE |
PoE in input Voltage | 18-57 V |
PoE-out
Details | |
---|---|
PoE-out ports | Ether10 |
PoE out | Passive PoE up to 57V |
Max out per port output (input 18-30 V) | 600 mA |
Max out per port output (input 30-57 V) | 420 mA |
Max total out (A) | 600 mA |
Certification & Approvals
Details | |
---|---|
Certification | CE, FCC, IC, EAC, ROHS |
IP | IP20 |
Other
Details | |
---|---|
PCB temperature monitor | Yes |
Voltage Monitor | Yes |
Wireless specifications
5 GHz | Transmit (dBm) | Receive Sensitivity |
---|---|---|
6MBit/s | 33 | -96 |
54MBit/s | 29 | -81 |
MCS0 | 33 | -96 |
MCS7 | 28 | -77 |
MCS9 | 26 | -72 |
2.4 GHz | Transmit (dBm) | Receive Sensitivity |
---|---|---|
1MBit/s | 28 | -100 |
11MBit/s | 28 | -94 |
6MBit/s | 29 | -96 |
54MBit/s | 25 | -80 |
MCS0 | 26 | -96 |
MCS7 | 24 | -79 |
Mikrotik Port Forwarding Configuration For Routrer OS 7.13
Mikrotik Dns Cache Configuration
Mikrotik DNS Cahe Configuration Include The Following Rule :
IP Firewall Configuration Rule :
1 . Filter Rule - Reject & Drop Remote Request From Wan
2 . Nat Rule - To Send All DNS Traffic From Port 53 to port 53 on Local to your router
3 . Mangle Rule - To Mark Your Local dns Packet
Queue Configuration Rule :
1 . Queue Type Rule Configuration -
2 . Queue Tree Rule Configuration -
3 . Simple Queue Rule Configuration - For Local Area Network 192.168.88.10 - 20 IP Range Rule Configuration
Description :
FlashFig is an application for mass router configuration. It can be used by MikroTik distributors, ISPs, or any other companies who need to apply RouterOS configuration to many routers in the shortest possible time.
FlashFig applies MikroTik RouterOS configuration to any RouterBOARD within 3 seconds. You can perform FlashFig on a batch of routers, the only thing you need is to connect RouterBOARD to a Layer 2 network running FlashFig and to power a FlashFig-enabled RouterBOARD up.
FlashFig only runs on a Windows computer and is available from the downloads page.
All RouterBOARDs support FlashFig mode. It works between a Windows computer running FlashFig and a RouterBOARD in the same broadcast domain (direct Layer 2 Ethernet network connection is required).
The best-selling ceiling access point is back – stronger than ever!
When it comes to wireless network in the office, you can’t afford to cut corners and risk inhibiting your team’s performance. You need excellent coverage throughout the premises. You need a device that can handle a large number of clients. You need a reliable, flexible, cost-effective solution: the cAP ax!
Both open office and cubicle layouts usually encounter a variety of network issues: signal gets absorbed, reflected, it becomes unstable.
Mirrors, tinted glass, TVs, metal file cabinets – all sorts of things can get in the way.
Our solution is simple, effective, and elegant: let your access point rise above all the obstacles! In other words, a ceiling access point is a great way to prevent signal loss in large, crowded areas with many obstacles.
There is another benefit to this form-factor: cAP ax remains hidden in plain sight, attracting less unwanted attention than a smoke sensor.
Your clients, guests, or colleagues won’t even notice it.
But they will definitely notice the blazing-fast wireless connection!
With the Generation6 802.11ax wireless standard, we’re looking at up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum, if we compare it to the previous generations! But what’s more important than speed is the stability. Our latest AX devices can withstand and navigate even the toughest wireless interference scenarios, offering the most stable and uninterrupted signal to date!
cAP ax features a modern quad-core CPU running at 1.8 GHz, NAND storage, and a gigabyte of RAM. Enough to harvest the full potential of the most powerful networking software on the market – RouterOS v7! Complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing, or multiple remote work VPN tunnels – cAP ax can do it all!
Compared to the previous generation, cAP ax offers multiple enhanced authentication types: OWE, WPA3-PSK, WPA3- EAP, and 802.11r roaming.
cAP ax is also a great way to make your office network installation and maintenance so much easier, as it features PoE-in and PoE-out. That’s right – you can use cAP ax to power other devices, such as network switches, CCTV cameras, or even another cAP ax! And, speaking of easy office networks... Just a few clicks in our latest wifiwave2 CAPsMAN central management system - and you’re done setting up hundreds of cAP ax devices! You can use all sorts of MikroTik devices to run CAPsMAN effortlessly, for example - your main gateway.
Specifications
Details | |
---|---|
Product code | cAPGi-5HaxD2HaxD |
Architecture | ARM 64bit |
CPU | IPQ-6010 |
CPU core count | 4 |
CPU nominal frequency | auto (864 - 1800) MHz |
Switch chip model | IPQ-6010 |
RouterOS license | 4 |
Operating System | RouterOS v7 |
Size of RAM | 1 GB |
Storage size | 128 MB |
Storage type | NAND |
MTBF | Approximately 200'000 hours at 25C |
Tested ambient temperature | -40°C to 70°C |
IPsec hardware acceleration | Yes |
Suggested price | $129.00 |
Wireless capabilities
Details | |
---|---|
Wireless 2.4 GHz Max data rate | 574 Mbit/s |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz standards | 802.11b/g/n/ax |
Antenna gain dBi for 2.4 GHz | 6 |
Wireless 2.4 GHz chip model | QCN-5022 |
Wireless 2.4 GHz generation | Wi-Fi 6 |
Wireless 5 GHz Max data rate | 1200 Mbit/s |
Wireless 5 GHz number of chains | 2 |
Wireless 5 GHz standards | 802.11a/n/ac/ax |
Antenna gain dBi for 5 GHz | 5.5 |
Wireless 5 GHz chip model | QCN-5052 |
Wireless 5 GHz generation | Wi-Fi 6 |
WiFi speed | AX1800 |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 2 |
Number of 1G Ethernet ports with PoE-out | 1 |
Powering
Details | |
---|---|
Number of DC inputs | 2 (PoE-IN, DC jack) |
DC jack input Voltage | 18-57 V |
Max power consumption | 36 W |
Max power consumption without attachments | 11 W |
Cooling type | Passive |
PoE in | 802.3af/at |
PoE in input Voltage | 18-57 V |
PoE-out
Details | |
---|---|
PoE-out ports | Ether2 |
PoE out | Passive PoE up to 57V |
Max out per port output (input 18-30 V) | 600 mA |
Max out per port output (input 30-57 V) | 400 mA |
Max total out (A) | 600 mA |
Total output current | 0.4 |
Total output power | 19.2 |
Certification & Approvals
Details | |
---|---|
Certification | CE, FCC, IC, EAC, ROHS |
IP | 20 |
Other
Details | |
---|---|
CPU temperature monitor | Yes |
Mode button | Yes |
Wireless specifications
2.4 GHz | Transmit (dBm) | Receive Sensitivity |
---|---|---|
1MBit/s | 23 | -100 |
11MBit/s | 23 | -94 |
6MBit/s | 24 | -96 |
54MBit/s | 21 | -80 |
MCS0 | 24 | -96 |
MCS7 | 20 | -75 |
MCS9 | 19 | -70 |
MCS11 | 17 | -67 |
5 GHz | Transmit (dBm) | Receive Sensitivity |
---|---|---|
6MBit/s | 24 | -96 |
54MBit/s | 21 | -80 |
MCS0 | 24 | -96 |
MCS7 | 20 | -75 |
MCS9 | 19 | -70 |
MCS11 | 17 | -67 |
- 1